Details about the SIENNA technology including address assignment and technical data can be found here:

SIENNA CONCEPT
Aktor SAM1L

SAM1L

SAM1L-ST01-H01

EAN 4260194734006

Actuator with input

The SIENNA SAM1L module has an 230V input (similar to SM1L) and one switched output(230V) rated at 10A. The input can be connected to various switching elements (e.g. motion detector, thermostat, switch, push-button).

One binary input (L, 1) with 230V / ~50Hz. Can also be used with switches that have an integrated control light.
One switched output rated at 10A
 Pushbutton/ Surge relay

 On/Off switch

 3-Way switch

AM2L / AM2X

AM2L / AM2X

AM2L-ST02-H01
AM2X-ST06-H01

EAN 4260194730060 / 107

Actuator with two output channels

The SIENNA AM2L actuator can either be directly attached to an electrical device or flush-mounted and is designed for switching two separate devices or electrical circuits. The actuator has two relay-switched output for loads up to 5A.

L1, L2 ofr connecting to loads / electrical circuits: one relay each to switch up to 5A on L1, L2.
The output terminal N is bridged to the neutral of the power supply.

The SIENNA AM2X actuator is similar to AM2L but has floating outputs.

SAM2L

SAM2L

SAM2L-ST03-H01

EAN 4260194734051

Actuator with two inputs
and two outputs

The SIENNA SAM2L can switch 2 different loads independent of each other. has two relay-switched outputs for switching 2 separate devices with current ratings up to 5A. The 2 inputs with flexible wires can be directly connected to a 2-gang switch.

Low voltage inputs: potental-free switching elements required!

Three flexible wires for connecting to a switch.
L1 and L2 for connecting to loads. N is bridged to the neutral of the power supply.
Pushbutton/ Surge relay

On/Off

Off/On (inversion of On/Off mode)

SAM1LT

SAM1LT

SAM1LT-ST03-H01

EAN 4260194734013

Sensor / Actuator combination
with time-delayed switching

The SIENNA SAM1LT module includes a time-delayed switching functionality in addition to the features available in the SAM1L module (e.g. for controlling hallway lights). Delays can be programmed in the range between 1 min. and 2 hours; an alarm function is also available.

One binary input (L, 1) with 230V / ~50Hz. Can also be used with switches that have an integrated control light.
Outputs
L’, N connected to electrical device; One relay rated at 10A to switch L’.
N is bridged to the neutral of the power supply.
Pushbutton / Surge relay

Alarm signal when switching off

3-Way switch

AM1A / AMXA

AM1A / AMXA

AM1A-ST04-H01
AMXA-ST04-H01

EAN 4260194730015 / 46

Actuator for alternate switching

The SIENNA AM1A / AMXA actuator can either be directly attached to an electrical device or flush-mounted behind a power outlet and is designed for alternate switching. This actuator has two outputs with oppositely switched relays for electrical devices with current ratings up to 5A.

L1, N, L2 to the devices / electrical circuits: L1 and L2 are oppositely switched outputs up to 5A. The output terminal N is bridged to the neutral of the power supply.
X1, X, X2 are connected to the devices: X1 and X2 are oppositely switched outputs with an external potential (X) up to 5A.
AM1C

AM1C

AM1C-ST01-H01

EAN 4260194730039

Actuator with current measurement

Actuator rated at 6A with current measurement of attached load.

Visualization and recording of power usage with SIENNA Professional and SIENNA Home Connect.

One switched output rated at 6A.
AM1P / AM1CP

AM1P / AM1CP

AMM1P-ST01-H01
AMXA-ST01-H01

EAN 4260194730039 / 138

Plug-in module

SIENNA AM1P
Actuator similar to SAM1L but with no input.
Available as plug-in module.

SIENNA AM1CP
Actuator similar to AM1C.
Available as plug-in module.